Page 1 of 1
Refinishing floor tiles
Posted: Mon Mar 06, 2017 8:32 pm
by jonjo
I have those standard 'Aristo' marble effect floor tiles and they now need to be diamond sanded and repolished - to make things worse I have also tipped acid on a few and removed the polished surface!
I am hoping this can be achieved and avoid the need to tile over the top and replace on the stairs.
Please PM me if you know anyone who can help. I am in Peyia.
Many thanks
Jon
Re: Refinishing floor tiles
Posted: Mon Mar 06, 2017 8:55 pm
by PaphosAL
Consider overlaying those 'cold to walk on in bare feet' tiles with wood flooring panels, Jon, perhaps with a layer of insulation twixt the two?
Cheers- AL
Re: Refinishing floor tiles
Posted: Wed Mar 08, 2017 6:13 pm
by Dominic
Does anybody have any suggestions on how to cut a large (18 inch) tile in half? I have a tile cutter saw but it is designed for smaller tile, so I will end up with the middle half not cut, so to speak.
Re: Refinishing floor tiles
Posted: Thu Mar 09, 2017 9:41 am
by lefkes
Dominic wrote: ↑Wed Mar 08, 2017 6:13 pm
Does anybody have any suggestions on how to cut a large (18 inch) tile in half? I have a tile cutter saw but it is designed for smaller tile, so I will end up with the middle half not cut, so to speak.
I,ve always used an hand held angle grinder with a diamond tipped blade .
Lefkes