Page 1 of 1

IKEA

Posted: Sun Jan 15, 2017 2:08 pm
by vic 1
Hi all want to go to ikea from paphos down the

motorway where do I come off is there a sign?
any help most welcome
Vic

Re: IKEA

Posted: Sun Jan 15, 2017 2:13 pm
by cyprusgrump
vic 1 wrote: Sun Jan 15, 2017 2:08 pm Hi all want to go to ikea from paphos down the

motorway where do I come off is there a sign?
any help most welcome
Vic
Signpost is Strovolos and Nicosia General Hospital

Re: IKEA

Posted: Sun Jan 15, 2017 4:04 pm
by darrow
don't do what we did. put the mall in the sat nav and ended up at another mall somewhere. a cypriot told us to put in the cyprus mall. we got there eventually.

Re: IKEA

Posted: Sun Jan 15, 2017 4:18 pm
by Lofos-Jan
The junction is no. 3. As you come off, get into the right hand land then turn right at the roundabout at the bottom.Follow the dual carriageway to the next roundabout then turn left. Go past the hospital on your right and you will come to IKEA and the Mall of Cyprus on your left.

Jeanne

Re: IKEA

Posted: Sun Jan 15, 2017 7:47 pm
by vic 1
Thanks to all for that should be able to find it now.
Vic

Re: IKEA

Posted: Mon Jan 26, 2026 8:55 am
by RN13
Is IKEA Paphos located in Kings Mall or in New Mall, Paphos?

Re: IKEA

Posted: Mon Jan 26, 2026 8:57 am
by RN13
Is IKEA Paphos located in Kings Mall or in New Mall, Paphos?

Re: IKEA

Posted: Mon Jan 26, 2026 9:00 am
by trevnhil
As far as I am aware, there is No IKEA store in Paphos.

Re: IKEA

Posted: Mon Jan 26, 2026 9:02 am
by RN13
Oh. Then is there any place in Paphos selling reasonably priced modern light furniture? Thanks.

Re: IKEA

Posted: Mon Jan 26, 2026 10:15 am
by trevnhil
I would look into 'Steptoes' a few hundred yards on the left, above the main (camera) traffic lights going up Mesogi Road

There is another place a fair bit further up the same road, but it is one street behind the main road on the left.. When you see a big GYM on the right, you need to take the next left and then left again and it is a couple of hundred yards on your right

Re: IKEA

Posted: Mon Jan 26, 2026 10:19 am
by RN13
Many thanks